Cura sets nozzle temperature to 0 before a few final layers of the
Por um escritor misterioso
Descrição
I'm running a custom 3d printer with 2 extruders (2 in 1 out nozzle) and when I put in these settings, CURA automatically sets the temperature of nozzle to 0 even before the print is done. This results in the last final few prints not printing (cold extrusion). I'm attaching my configuration file
Using Cura with EVO, EVO 22, EVO 2X and EVO R
slicer problem) cura adding extra layers right before top with top layers set to 0 and infill on 0. : r/FixMyPrint
Cura settings in 5 minutes or less! - 4.2 - Build Plate Temperature
Feature Request for Cua: Disable Walls for First Layer Only - UltiMaker Cura - UltiMaker Community of 3D Printing Experts
Fatal flaw in 5.3.0. unable to slice with reasonal values. whatever value i put in small layer printing temperature, it will not slice. : r/Cura
slicer problem) cura adding extra layers right before top with top layers set to 0 and infill on 0. : r/FixMyPrint
Incorrect nozzle temperature issues reported in #2942 not resolved in Cura 3.2.0 · Issue #3182 · Ultimaker/Cura · GitHub
Cura not honoring initial layer temperatures when printing on A350 - Snapmaker 2.0 - Snapmaker: where creation happens
2nd layer fails with prusaslicer but works with cura – PrusaSlicer – Prusa3D Forum
Making a Temperature Tower Test in Cura
FR: Auto Set Layer 0 Temps before and after G29 when G29 in printer start code with no other temp settings · Issue #11289 · Ultimaker/Cura · GitHub
de
por adulto (o preço varia de acordo com o tamanho do grupo)